Owner manual
Swimming Pool Tips
Start-up and Yearly Maintenance
1.
Make sure the pool has adequate circulation. The pool
water must completely circulate through the pump and
filter at least 1 to 2 times per day. This usually requires
8 to 12 hours. Check with your dealer for the proper
circulation time for your pool.
2.
3.
Before beginning with any pool care program, you must
first balance your pool water. Take a water sample to your
local pool professional or use a complete test kit that will
test for the following important elements.
If your fill water is high in metals, use a sequestering
agent or metal out product at start-up only before using
the Aqua Smarte Plus Mineral Activator. See your local
dealer for details on using these products and always
follow manufacturers directions carefully.
4.
After your pool is up and running
smoothly, continue to test your
water for pH, total alkalinity
and chlorine with Aqua Smarte
Brand Test Strips and maintain
its balance by adding any
necessary adjustment products
(see your dealer for details).
5.
Check the pool’s filter gauge often and periodically clean
filter per the manufacturer’s directions. A dirty filter
will slow the flow of water which could hamper proper
circulation.
Water Balance Guidelines
pH: 7.2 – 7.8
Total Alkalinity: 60 – 120 ppm
Calcium Hardness: 150 – 400
Total Dissolved Solids: <1500
Stabilizer: 20 – 80 ppm
Free Chlorine: 0.5 – 1.0 ppm