Product Manual

Page 12
STANDARD OPERATION
IF YOUR RECEIVER IS NEW AND UNACTIVATED, MAKE SURE TO
DO THE FIRST-TIME SETUP PROCEDURE ON PAGES 6-11 FIRST.
STANDARD OPERATION
IMPORTANT!
Your TV screen may look different from what
is shown in this manual. Screen information
may vary depending on choices you make.
For best results,
follow the on-screen instructions.
NOTE: This manual shows graphics for a DISH Wally receiver. If you have a ViP model receiver, you can access the
DISH Tailgater with ViP Receiver Owner’s Manual by going to kingconnect.com/support. Click on “Owners
Manuals” and choose the manual for DISH Tailgater with ViP receiver.
1. After connecting and turning on
your equipment as instructed on
pages 4-5, the Wally Startup screens
will appear (this may take several
minutes).
NOTE: If the Wally Standby screen
appears, press any button on your
remote to continue.
WHILE IN USE, DO NOT BLOCK THE DISH
TAILGATER PRO’S LINE-OF-SIGHT TO THE
SATELLITES IN THE SOUTHERN SKY AT ANY TIME!
IMPORTANT!
If you move the antenna
unit any time during or after
the scan, you will have to
repeat the scan.