Specification

ManualsBrandsKING ManualsGarage Heaters5000-Watt 240-Volt Electric Garage Portable Heater

Garage/Shop Heater EKB Series

A: Series

B: 12 - 120V, 20 - 208V

24 - 240V

C: Watts (5000)

D: TB- Thermostat

& Bracket

EKB

Engineering Speciﬁcations

Heating Elements: Rigid Muscovite Mica construction with 80-20

NiChrome heating wire provides quick heating without cold air

start ups, heat is wiped from elements as fans slows to a stop. Manual

reset Safety sensor on each element.

Thermostat: Factory installed single pole operation range 40 to 85

degrees F.

Unit Bearing Motor: Permanently lubricated, cast aluminum unit bearing,

6-watt output 4 pole motor, 1550 rpm, 20 cc oil supply.

Mounting Bracket: 18 ga steel, multiple mounting options - ceiling/wall.

CFM: 270 Maximum

Thermal Overload: Heaters shall be equipped with King’s patented

thermal overload Smart Limit Protection

, which disconnects elements

and motor in the event normal operating temperatures are exceeded.

If thermal overload trips due to abnormal operating temperatures,

thermal overload shall remain open until manually reset by turning the

heater off for 15 minutes.

U.S. PATENT #6,748,163 B2 • CIPO PATENT #2,393,882

Case: 22 ga steel, inlet and outlet perforation, special side and top

safety air inlets.

Exterior: Durable textured finish.

Approval: cULus (E41422)

Ordering Information

MODEL UPC VOLTS WATTS AMPS WIRE BREAKER SIZE TEMP RISE HEATING SQ FT

EKB1230TB 16506 120 2850 24 10-2 w/ground 30 Amp 1 pole 40 500

EKB1220TB 16507 120 1920 16 12-2 w/ground 20 Amp 1 pole 40 300

EKB2050TB 16501 208 5000 24 10-2 w/ground 30 Amp 2 pole 80 750

EKB2040TB 16503 208 3750 18 10-2 w/ground 30 Amp 2 pole 70 600

EKB2030TB 16505 208 2850 14 12-2 w/ground 20 Amp 2 pole 50 500

EKB2450TB 16500 240 5000 20 10-2 w/ground 30 Amp 2 pole 80 750

EKB2440TB 16502 240 3850 16 12-2 w/ground 20 Amp 2 pole 70 600

EKB2430TB 16504 240 2850 12 14-2 w/ground 15 Amp 2 pole 50 500

120V

208V

240V

The EKB Garage/Shop Heater

The EKB is designed to be an affordable, high-capacity garage / shop heater. Combining King’s patented Smart Limit safety technology

with dual NiChrome coil elements for rapid heat transfer, the EKB is ideal for many residential applications. The flow-through design efficiently

moves air by pulling air from the back and sides of the heater and discharges it out the front, easily heating a large space. The built-in thermostat

has a temperature range from 40 to 85 degrees. The universal mounting bracket can be wall or ceiling mounted at a minimum of 6 feet above

the floor. Good air distribution and comfort is achieved by swiveling the bracket to specific work areas.

Quick heat element Built-in thermostat 1-year limited warranty

Long life unit bearing motor Universal mounting bracket

Patented Smart Limit

protection Standard color: black textured finish

Aluminum fan blade Safety sensor on each element

Summary of content (2 pages)

PAGE 1
Garage/Shop Heater EKB Series EKB A 24 B 40 C TB D A: Series B: 12 - 120V, 20 - 208V 24 - 240V C: Watts (5000) D: TB- Thermostat & Bracket Quick heat element Long life unit bearing motor Patented Smart Limit protection Aluminum fan blade ® Built-in thermostat Universal mounting bracket Standard color: black textured finish Safety sensor on each element 1-year limited warranty The EKB Garage/Shop Heater The EKB is designed to be an affordable, high-capacity garage / shop heater.
PAGE 2
Garage/Shop Heater EKB Series Dimensional Data EKB Unit Heater Bracket Information Heater case size w/o bracket Height:13 5/8 in. / 34.6 cm Width: 10 3/8 in./ 26.35 cm Depth: 9 3/9 in. / 24.76 cm Hole Sizes * 1/2 in. /1.27 cm 3 holes + 1/4 in. /.63 cm 4 holes Maximum Outside Dims W/bracket and stat Height:18 3/4 in / 47.62 cm Width: 11 3/8 in. / 28.90 cm Depth: 10 5/8 in./26.98 cm 0.875 EKO 6.9 Minimum clearances from walls and ceiling 6 inches / 15.24 cm to the side 5 inches / 12.