Specification Sheet

Wall HeaterPAW Ultra Series
Contractor shall supply and install PAW Ultra Series in-wall forced-air electric heaters manufactured by King Electrical Mfg. Company,
of the wattage and voltage as indicated on the plans.
Ratings: Heaters shall be available in wattages of 250 to 2,250
at 120, 208, 240, or 277 Volts.
Blower and Motor: A whisper quiet tangential blower, delivering 75
CFM, shall be driven by a shaded pole, permanently lubricated, C-frame
type motor with impedance protection and sealed bearings. Motors shall
be the same voltage as the heater.
Elements: Element assemblies shall consist of three steel sheathed
heating tubes in a furnace-brazed, plate-finned, block design. Each
sheathed tube shall contain coiled Ni-Chrome wire embedded in an
insulator of Magnesium Oxide. The element assembly shall provide up to
seven (7) possible wattage configurations available for selection during
field installation. The use of external resistors, diodes, or other weak links
to obtain multiple wattages will not be acceptable.
Thermal Overload: Heaters shall be equipped with King’s patented
thermal overload Smart Limit Protection
®, which disconnects elements
The PAW Ultra Series
Make a bold statement with the PAW ULTRA series heater. Adding modern sophistication to our original Pic-A-Watt multi-watt
steel fin heater with its sleek modern grill design, the ULTRA is ideal for upscale condominiums and luxury residences. King’s exclusive
Pic-A-Watt steel fin element allows customers to select from a range of wattage options, tailoring the heater to an area’s specific heating
requirements. Perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass
steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble -free operation. PAW
comes with five year warranty and 20+ year history of reliability. For use with an electronic line voltage wall thermostat.
and motor in the event normal operating temperatures are exceeded.
If thermal overload trips due to abnormal operating temperatures, thermal
overload shall remain open until manually reset by turning the heater off
for 15 minutes. Automatic reset of thermal overloads, which allow the
element to continue to cycle under abnormal conditions, will not be
accepted.
Grill: The grill shall be a louvered with multiple linear steel bars
secured to a steel back plate, with rounded sides to prevent snags with
other materials. The grill shall be epoxy power-coated in white or almond.
Wall Can: The wall can shall be 20 gauge electro-galvanized steel and
shall contain a minimum of three (3) knockouts. The wall can shall have
a depth gauge indicator, and a factory installed, insulated and stranded
copper ground-wire. Minimum 4”clearance to floors and 6”sidewalls.
Zero clearance to combustibles in the wall.
Approvals: cULus (E41422)
A: Wall Heater
B: 12 - 120V 24 - 240V
20 - 208V 27 - 277V
C: Watts (250 to 2250)
D: ULTRA Grill
PAW
A
12
B
15
C
-U
D
Standard color: white
(optional almond color available)
120, 208, 240, 277 Volts
5 Year Warranty
Ultra Grill
Pic-A-Watt
®
Element
Squirrel Cage Blower
C-Frame Motor
Patented Smart Limit Protection
®
Whisper Quiet
Multiple wattages 250-2250
16 gauge powder-coated grill
SHIP WEIGHT lbs
9.5
9.5
VOLTS
120
208
AMPS
2.1-12.5
2.4-10.8
9.5
*See PAW Series page for dimsenional data
MODEL
PAW1215-U
PAW2022-U
PAW2422-U 240
18710
18720
18700
UPC WATTS
250•500•750•1000•1250•1500
500•750•1000•1250•1500•1750•2250
500•750•1000•1250•1500•1750•2250 2.1-9.4
9.5PAW2720-U 27722241 1000•2000 3.6-7.2
Ordering Information
Engineering Specifications