User Guide

QUEST

VQ4100 Quick Reference Guide

For DIRECTV

This Quick Reference Guide will have you watching TV in minutes!

For additional information regarding the KING Quest,

see your Owner’s Manual.

IMPORTANT!

DO NOT apply feet if you will be roof

mounting the antenna unit.

IMPORTANT!

Antenna unit must have a clear view

of the southern sky. Any tall objects

can block the signal from reaching

the antenna.

Place antenna unit in a location to scan for DIRECTV 101 satellite.

Place the KING Quest on a stable and reasonably level surface with a clear view of the southern sky.

When placing the KING Quest in position, be sure surface is dry and free of loose dirt or sand.

Lay the unit on a soft, non-scratching surface, and apply the (3) rubber feet.

PAGE 1
QUEST TM For DIRECTV® VQ4100 Quick Reference Guide This Quick Reference Guide will have you watching TV in minutes! For additional information regarding the KING Quest, see your Owner’s Manual. 1 Lay the unit on a soft, non-scratching surface, and apply the (3) rubber feet. IMPORTANT! DO NOT apply feet if you will be roof mounting the antenna unit. 2 Place antenna unit in a location to scan for DIRECTV 101 satellite.
PAGE 2
3 Set up TV and receiver. The KING Quest will not work with SWM only receivers. For a list of compatible receivers, see www.kingconnect.com/dtv-receivers. All components sold separately. 4 Make connections 1-3 in the order shown. Plug in power supply last. Do not move antenna unit after plugging in power supply as the antenna has begun scanning. Place the power injector in an accessible location. Do not overtighten the coax connections. Do not put sharp bends or kinks in the coax cable.