User Manual
Page 5
You can connect a second receiver and TV to the AUX port on the antenna unit.
5 USING A SECOND RECEIVER
Second receiver must be congured the same as
the main receiver (see section 3, page 3).
Second receiver must not be a SWM-only receiver.
If your main receiver has a second “satellite in” port and built-in DVR, you can connect this input to the AUX
port to record programs on a different channel than the one you are watching.
All components sold
separately.
If you wish to start a new scan (for example, the unit gets moved and you lose reception):
Pressing the power inserter’s RESET button is the preferred method to start a new scan, but there are two
alternate methods as well:
• Disconnect and reconnect the coax from the MAIN port on the antenna unit.
• Press the RESET button on the receiver (this option works for select receivers only, such as
models D12, H24 and HR24).