Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED PLCC2 Orange 230 mcd 120 ° 20 mA 2.1 V

SPEC NO: DSAJ1153 REV NO: V.6A DATE: APR/12/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1201004775

3.5x2.8mm SURFACE MOUNT LED LAMP

Part Number: KA-3528SECKT

Super Bright Orange

Features

z Single color.

z Suitable for all SMT assembly and solder process.

z Available on tape and reel.

z Ideal for backlighting.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 4.

z RoHS compliant.

Description

The Super Bright Orange device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (5 pages)

PAGE 1
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: KA-3528SECKT Super Bright Orange Features Description z Single color. The Super Bright Orange device is made with AlGaInP (on z Suitable for all SMT assembly and solder process. GaAs substrate) light emitting diode chip. z Available on tape and reel. z Ideal for backlighting. z Package : 2000pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.
PAGE 2
Selection Guide Part No. Dice KA-3528SECKT Iv (mcd) [2] @ 20mA Lens Type Super Bright Orange (AlGaInP) Viewing Angle [1] Min. Typ. 200 350 *120 *230 Water Clear 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
PAGE 3
Super Bright Orange KA-3528SECKT SPEC NO: DSAJ1153 REV NO: V.6A DATE: APR/12/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.
PAGE 4
KA-3528SECKT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ1153 REV NO: V.6A DATE: APR/12/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.
PAGE 5
PACKING & LABEL SPECIFICATIONS KA-3528SECKT Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAJ1153 REV NO: V.6A DATE: APR/12/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.