Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED PLCC2 Blue 120 ° 150 mA 3.5 V

SPEC NO: DSAM4634 REV NO: V.2B DATE: MAR/29/2013 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1201008295

Part Number: KA-3529AQB25Z4S Blue

Package Dimensions

3.5x2.8 mm SMD CHIP LED LAMP

Features

Single color.

Suitable for all SMT assembly and solder process.

Available on tape and reel.

White SMD package, silicone resin.

Low thermal resistance.

Package: 2000pcs / reel.

Moisture sensitivity level : level 2a.

RoHS compliant.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in

the datasheet are subject to change without notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Description

The Blue source color devices are made with InGaN on

2O3 substrate Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Summary of content (6 pages)

PAGE 1
3.5x2.8 mm SMD CHIP LED LAMP Part Number: KA-3529AQB25Z4S Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description Single color. The Blue source color devices are made with InGaN on Suitable for all SMT assembly and solder process. Al2O3 substrate Light Emitting Diode. Available on tape and reel. Static electricity and surge damage the LEDS. White SMD package, silicone resin.
PAGE 2
Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1.
PAGE 3
Selection Guide Dice Part No. KA-3529AQB25Z4S Iv (cd) [2] @ 150mA Lens Type Blue (InGaN) Φv (lm) [2] @ 150mA Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 1 1.3 3.5 4.5 120° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. LEDs are binned according to their luminous flux. 4.
PAGE 4
Blue KA-3529AQB25Z4S SPEC NO: DSAM4634 REV NO: V.2B DATE: MAR/29/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.
PAGE 5
KA-3529AQB25Z4S Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Reel Dimension Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAM4634 REV NO: V.2B DATE: MAR/29/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.
PAGE 6
PACKING & LABEL SPECIFICATIONS KA-3529AQB25Z4S SPEC NO: DSAM4634 REV NO: V.2B DATE: MAR/29/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.