Data Sheet

SPEC NO: DSAA7730 REV NO: V.2 DATE: DEC/06/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1334000068

P/N: KB-2300ID HIGH EFFICIENCY RED

Description

The High Efficiency Red source color devices are

made with Gallium Arsenide Phosphide on Gallium

Phosphide Orange Light Emitting Diode.

8.89mmx3.81mm LED LIGHT BAR

Features



UNIFORM LIGHT EMITTING AREA.



LOW CURRENT OPERATION.



EASILY MOUNTED ON P.C. BOARDS.



FLUSH MOUNTABLE.



EXCELLENT ON/OFF CONTRAST.



CAN BE USED WITH PANELS AND LEGEND MOUNTS.



CATEGORIZED FOR LUMINOUS INTENSITY.



RoHS COMPLIANT.

Package Dimensions & Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. Specifications are subject to change without notice.

PAGE 1
8.89mmx3.81mm LED LIGHT BAR P/N: KB-2300ID Features HIGH EFFICIENCY RED Description UNIFORM LIGHT EMITTING AREA. The High Efficiency Red source color devices are LOW CURRENT OPERATION. made with Gallium Arsenide Phosphide on Gallium EASILY MOUNTED ON P.C. BOARDS. Phosphide Orange Light Emitting Diode. FLUSH MOUNTABLE. EXCELLENT ON/OFF CONTRAST. CAN BE USED WITH PANELS AND LEGEND MOUNTS. CATEGORIZED FOR LUMINOUS INTENSITY. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1.
PAGE 2
Selection Guide Part No. Dice KB-2300ID Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED Min. Typ. 10 36 Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red KB-2300ID Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA7730 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/06/2005 PAGE: 3 OF 3 DRAWN: W.J.