Data Sheet

SPEC NO: DSAA7730 REV NO: V.2 DATE: DEC/06/2005 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1334000068
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at T
A=25°C
Part No. Dice Lens Type
Iv (mcd)
@ 20mA
Min. Typ.
KB-2300ID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 10 36
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD
Dominant Wavelength High Efficiency Red 625 nm IF=20mA
∆λ1/2
Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR = 5V
Parameter High Efficiency Red Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds