Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysSeven-segment display Green 7.62 mm 2 V No. of digits: 2

SPEC NO: DSAG7167 REV NO: V.9A DATE: APR/07/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1352000345

SURFACE MOUNT DISPLAY

Part Number: KCDA03-123 Green

Features

z 0.3 inch digit height.

z Low current operation.

z Excellent character appearance.

z Mechanically rugged.

z Package :300pcs / reel.

z Gray face, white segment.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The Green source color devices are made with AlGaInP on

GaAs substrate Light Emitting Diode.

CGK

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3.The gap between the reflector and PCB shall not exceed 0.25mm.

Summary of content (5 pages)

PAGE 1
SURFACE MOUNT DISPLAY Part Number: KCDA03-123 Green Features Description z 0.3 inch digit height. The Green source color devices are made with AlGaInP on z Low current operation. GaAs substrate Light Emitting Diode. z Excellent character appearance. z Mechanically rugged. z Package :300pcs / reel. z Gray face, white segment. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram CGK Notes: 1.
PAGE 2
Selection Guide Part No. Dice KCDA03-123 Iv (ucd) [1] @ 10mA Lens Type Green (AlGaInP) Min. Typ. 3600 12000 *1400 *3100 White Diffused Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Green KCDA03-123 SPEC NO: DSAG7167 REV NO: V.9A DATE: APR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.
PAGE 4
KCDA03-123 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications SPEC NO: DSAG7167 REV NO: V.9A DATE: APR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.
PAGE 5
PACKING & LABEL SPECIFICATIONS KCDA03-123 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAG7167 REV NO: V.9A DATE: APR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.