Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysAlphanumeric segment display Green 10.16 mm 2 V No. of digits: 2

SPEC NO: DSAG4067 REV NO: V.8A DATE: APR/07/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1362000051

SURFACE MOUNT DISPLAY

Part Number: KCPDA04-123 Green

Features

z 0.4 inch character height.

z Low current operation.

z High contrast and light output.

z Categorized for luminous intensity.

z Mechanically rugged.

z Gray face, white segment.

z Package :250pcs / reel.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The Green source color devices are made with AlGaInP on

GaAs substrate Light Emitting Diode.

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3.The gap between the reflector and PCB shall not exceed 0.25mm.

CGK

Summary of content (5 pages)

PAGE 1
SURFACE MOUNT DISPLAY Part Number: KCPDA04-123 Green Features Description z 0.4 inch character height. The Green source color devices are made with AlGaInP on z Low current operation. GaAs substrate Light Emitting Diode. z High contrast and light output. z Categorized for luminous intensity. z Mechanically rugged. z Gray face, white segment. z Package :250pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram CGK Notes: 1.
PAGE 2
Selection Guide Part No. Dice KCPDA04-123 Iv (ucd) [1] @ 10mA Lens Type Green (AlGaInP) Min. Typ. 5600 11000 *1400 *3100 White Diffused Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Green KCPDA04-123 SPEC NO: DSAG4067 REV NO: V.8A DATE: APR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.
PAGE 4
KCPDA04-123 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4067 REV NO: V.8A DATE: APR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.
PAGE 5
PACKING & LABEL SPECIFICATIONS KCPDA04-123 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAG4067 REV NO: V.8A DATE: APR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.