Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysAlphanumeric segment display Red 10.16 mm 1.85 V No. of digits: 1

SPEC NO: DSAG7185 REV NO: V.7A DATE: APR/13/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1361000056

SURFACE MOUNT DISPLAY

Part Number: KCPSC04-105 Hyper Red

Features

z 0.4 inch character height.

z Low current operation.

z High contrast and light output.

z Categorized for luminous intensity.

z Mechanically rugged.

z Gray face,white segment.

z Package : 400pcs / reel.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The Hyper Red source color devices are made with Al-

GaInP on GaAs substrate Light Emitting Diode.

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3.The gap between the reflector and PCB shall not exceed 0.25mm

SURK

Summary of content (5 pages)

PAGE 1
SURFACE MOUNT DISPLAY Part Number: KCPSC04-105 Hyper Red Features Description z 0.4 inch character height. The Hyper Red source color devices are made with Al- z Low current operation. GaInP on GaAs substrate Light Emitting Diode. z High contrast and light output. z Categorized for luminous intensity. z Mechanically rugged. z Gray face,white segment. z Package : 400pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram SURK Notes: 1.
PAGE 2
Selection Guide Part No. Dice KCPSC04-105 Iv (ucd) [1] @ 10mA Lens Type Hyper Red (AlGaInP) Min. Typ. 14000 36000 *3600 *8300 White Diffused Description Common Cathode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Hyper Red KCPSC04-105 SPEC NO: DSAG7185 REV NO: V.7A DATE: APR/13/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.
PAGE 4
KCPSC04-105 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG7185 REV NO: V.7A DATE: APR/13/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.
PAGE 5
PACKING & LABEL SPECIFICATIONS KCPSC04-105 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAG7185 REV NO: V.7A DATE: APR/13/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.