Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysSeven-segment display Yellow 5.08 mm 1.95 V No. of digits: 1

SPEC NO: DSAG0975 REV NO: V.7A DATE: APR/07/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000431

SURFACE MOUNT DISPLAY

Part Number: KCSC02-107 Super Bright Yellow

Features

z 0.2inch digit height.

z Low current operation.

z Excellent character appearance.

z Mechanically rugged.

z Gray face,white segment.

z Package : 650pcs / reel.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The Super Bright Yellow device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3. The gap between the reflector and PCB shall not exceed 0.25mm.

Summary of content (5 pages)

PAGE 1
SURFACE MOUNT DISPLAY Part Number: KCSC02-107 Super Bright Yellow Features Description z 0.2inch digit height. The Super Bright Yellow device is made with AlGaInP (on z Low current operation. GaAs substrate) light emitting diode chip. z Excellent character appearance. z Mechanically rugged. z Gray face,white segment. z Package : 650pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1.
PAGE 2
Selection Guide Part No. Dice Super Bright Yellow (AlGaInP) KCSC02-107 Iv (ucd) [1] @ 10mA Lens Type White Diffused Min. Typ. 21000 50000 *5600 Description Common Cathode, Rt. Hand Decimal. *15000 Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
Super Bright Yellow KCSC02-107 SPEC NO: DSAG0975 REV NO: V.7A DATE: APR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.
PAGE 4
KCSC02-107 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0975 REV NO: V.7A DATE: APR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.
PAGE 5
PACKING & LABEL SPECIFICATIONS KCSC02-107 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAG0975 REV NO: V.7A DATE: APR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.