Datasheet

SPEC NO: DSAF9917 REV NO: V.5A DATE: MAR/31/2012 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1351000454

SURFACE MOUNT DISPLAY

Part Number: KCSC03-101 High Efficiency Red

Features

z 0.3 inch digit height.

z Low current operation.

z Excellent character appearance.

z Mechanically rugged.

z Gray face, white segment.

z Package : 550pcs / reel.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3.The gap between the reflector and PCB shall not exceed 0.25mm.

PAGE 1
SURFACE MOUNT DISPLAY Part Number: KCSC03-101 High Efficiency Red Features Description z 0.3 inch digit height. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Excellent character appearance. Light Emitting Diode. z Mechanically rugged. z Gray face, white segment. z Package : 550pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant.
PAGE 2
Selection Guide Part No. Dice KCSC03-101 Iv (ucd) [1] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) Description Min. Typ. 1400 2500 *360 *700 Common Cathode, Rt. Hand Decimal. White Diffused Notes: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
High Efficiency Red SPEC NO: DSAF9917 APPROVED: WYNEC KCSC03-101 REV NO: V.5A CHECKED: Joe Lee DATE: MAR/31/2012 PAGE: 3 OF 5 DRAWN: C.H.
PAGE 4
KCSC03-101 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF9917 APPROVED: WYNEC REV NO: V.5A CHECKED: Joe Lee DATE: MAR/31/2012 PAGE: 4 OF 5 DRAWN: C.H.
PAGE 5
PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF9917 APPROVED: WYNEC REV NO: V.5A CHECKED: Joe Lee KCSC03-101 DATE: MAR/31/2012 PAGE: 5 OF 5 DRAWN: C.H.