Datasheet

SPEC NO: DSAA8057 REV NO: V.7 DATE: JUL/06/2007 PAGE: 1 OF 4

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1202000080

Part Number: KM-23SRD-F SUPER BRIGHT RED

Package Dimensions

Description

The Super Bright Red source color devices are made with

Gallium Aluminum Arsenide Red Light Emitting Diode.

SOT-23 SURFACE MOUNT LED LAMP

Features

zSOT-23 PACKAGE SURFACE MOUNT LED LAMP.

zLOW POWER CONSUMPTION.

zLONG LIFE - SOLID STATE RELIABILITY.

zPACKAGE: 2000PCS / REEL.

zMOISTURE SENSITIVITY LEVEL : LEVEL 3.

zRoHS COMPLIANT.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the lead emerge from the package.

4. Specifications are subject to change without notice.

5.The device has a single mounting surface. The device must be mounted according to the specifications.

PAGE 1
SOT-23 SURFACE MOUNT LED LAMP Part Number: KM-23SRD-F Features SUPER BRIGHT RED Description zSOT-23 PACKAGE SURFACE MOUNT LED LAMP. zLOW POWER CONSUMPTION. zLONG LIFE - SOLID STATE RELIABILITY. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. zPACKAGE: 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.
PAGE 2
Selection Guide Dice Part No. KM-23SRD-F Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) Viewing Angle [1] Min. Typ. 2 θ 1/2 36 70 140° RED DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Super Bright Red KM-23SRD-F SPEC NO: DSAA8057 REV NO: V.7 DATE: JUL/06/2007 PAGE: 3 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.
PAGE 4
KM-23SRD-F Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA8057 REV NO: V.7 DATE: JUL/06/2007 PAGE: 4 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.