Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED RGB 2.5x1x0.7mm Side Looking

Page 1 / 4

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

KPFA-2507BRGC-11

2.5 x 0.7 mm Right Angle SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

DESCRIPTIONS

z The Blue source color devices are made with InGaN

Light Emitting Diode

z The Hyper Red source color devices are made with

AlGaInP on GaAs substrate Light Emitting Diode

z The Green source color devices are made with InGaN

on Sapphire Light Emitting Diode

z Electrostatic discharge and power surge could

damage the LEDs

z It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

z All devices, equipments and machineries must be

electrically grounded

FEATURES

z 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7mm

thickness

z Low power consumption

z Wide viewing angle

z Ideal for backlight and indicator

z Package: 3000 pcs / reel

z Moisture sensitivity level: 3

z Tinned pads for improved solderability

z RoHS compliant

APPLICATIONS

z Backlight

z Status indicator

z Home and smart appliances

z Wearable and portable devices

z Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.15(0.006") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KPFA-2507BRGC-11

■ Blue (InGaN)

Water Clear

40 65

■ Hyper Red

(AlGaInP)

80 110

■ Green (InGaN)

200 400

130

Kingbright

Summary of content (4 pages)

PAGE 1
KPFA-2507BRGC-11 2.5 x 0.
PAGE 2
KPFA-2507BRGC-11 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Value Blue Hyper Red Green Unit Wavelength at Peak Emission IF = 20mA (typ) λpeak 460 630 515 nm Dominant Wavelength IF = 20mA (typ) λdom [1] 465 621 525 nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA (typ) Δλ 25 20 35 nm Capacitance (typ) C 100 25 45 pF Forward Voltage IF = 20mA (typ) (max) VF [2] 3.3 4.0 2.0 2.5 3.3 4.
PAGE 3
KPFA-2507BRGC-11 TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Blue Green Red Relative Intensity (a. u.) 100% Ta = 25 °C Ta = 25 °C 80% 0° -15° 15° 45° -45° 60% 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 R G B 30° -30° 0.5 0.0 90° 1.0 0.5 BLUE t h g i r b g n i K Luminous intensity normalised at 20 mA Ta = 25 °C 40 30 20 10 0 2.0 2.4 2.8 3.2 3.6 Forward voltage (V) 4.
PAGE 4
KPFA-2507BRGC-11 TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) t h g i r b Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. g in PACKING & LABEL SPECIFICATIONS K PRECAUTIONARY NOTES 1.