Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 460nm 20mcd 5mA

Page 1 / 4

DESCRIPTIONS

 The Blue source color devices are made with InGaN

on Sapphire-substrate Light Emitting Diode

 Electrostatic discharge and power surge could

damage the LEDs

 It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

 All devices, equipments and machineries must be

electrically grounded

FEATURES

 1.6 x 0.9 x 0.2 mm right angle SMD LED, 0.2mm

thickness

 Low power consumption

 Wide viewing angle

 Ideal for backlight and indicator

 Package: 4000 pcs / reel

 Moisture sensitivity level: 3

 Tinned pads for improved solderability

 RoHS compliant

APPLICATIONS

 Backlight

 Status indicator

 Home and smart appliances

 Wearable and portable devices



Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 5mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KPGA-1602QBC-KA-5MAV Water Clear

■ Blue (InGaN)

8 20 150°

KPGA-1602QBC-KA-5MAV

1.6 x 0.2 mm Right Angle SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (4 pages)

PAGE 1
KPGA-1602QBC-KA-5MAV 1.6 x 0.2 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN on Sapphire-substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.9 x 0.2 mm right angle SMD LED, 0.
PAGE 2
KPGA-1602QBC-KA-5MAV ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color λpeak Value Unit Typ. Max. Blue 460 - nm λdom [1] Blue 463 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 5mA Δλ Blue 25 - nm Capacitance C Blue 100 - pF Forward Voltage IF = 5mA VF [2] Blue 2.8 3.2 V Reverse Current (VR = 5V) IR Blue - 50 uA Temperature Coefficient of λpeak IF = 5mA, -10°C ≤ T ≤ 85°C TCλpeak Blue 0.
PAGE 3
KPGA-1602QBC-KA-5MAV TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Blue Relative Intensity (a. u.) 100% 80% 0° -15° Ta = 25 °C Ta = 25 °C 15° 30° -30° -45° 60% 45° 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 0.5 0.0 90° 1.0 0.5 BLUE Ta = 25 °C 6 4 2 0 2.4 2.6 2.8 3.0 3.2 Forward voltage (V) 3.4 Permissible forward current (mA) 5.
PAGE 4
KPGA-1602QBC-KA-5MAV PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.