Datasheet

SPEC NO: KDA0159 REV NO: V.1 DATE: SEP/10/2001 PAGE: 1 OF4

APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN

Description

The Hyper Red source color devices are made with DH

InGaAlP on GaAs substrate Light Emitting Diode.

3.2x1.6mm SMD CHIP LED LAMP

KPTD-3216SURC HYPER RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.0079") unless otherwise noted.

3. Lead spacing is measured where the lead emerge package.

4. Specifications are subject to change without notice.

Features

!3.2mmx1.6mm SMT LED,1.8mm THICKNESS.

!LOW POWER CONSUMPTION.

!WIDE VIEWING ANGLE.

!IDEAL FOR BACKLIGHT AND INDICATOR.

!VARIOUS COLORS AND LENS TYPES AVAILABLE.

!PACKAGE : 2000PCS / REEL.

Package Dimensions

PAGE 1
3.2x1.6mm SMD CHIP LED LAMP KPTD-3216SURC HYPER RED Features Description !3.2mmx1.6mm SMT LED,1.8mm THICKNESS. The Hyper Red source color devices are made with DH !LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3.
PAGE 2
Selection Guide Par t No . Dic e KPTD-3216SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 300 60 0 50 ° Un it s Tes t Co n d it io n s Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e Ty p . Max .
PAGE 3
Hyper Red KPTD-3216SURC SPEC NO: KDA0159 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/10/2001 DRAWN: S. H.
PAGE 4
KPTD-3216SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0159 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/10/2001 DRAWN: S. H.