Datasheet

SPEC NO: DSAB2739 REV NO: V.8 DATE: SEP/04/2007 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1101008142

T-1 (3mm) INFRARED EMITTING DIODE

PRELIMINARY SPEC

Part Number: L-7104F3BT

Features

z MECHANICALLY AND SPECTRALLY MATCHED TO

THE PHOTOTRANSISTOR.

z BLUE TRANSPARENT LENS.

z RoHS COMPLIANT.

Description

F3 Made with Gallium Arsenide Infrared Emitting diodes.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 (3mm) INFRARED EMITTING DIODE PRELIMINARY SPEC Part Number: L-7104F3BT Features Description z MECHANICALLY AND SPECTRALLY MATCHED TO F3 Made with Gallium Arsenide Infrared Emitting diodes. THE PHOTOTRANSISTOR. z BLUE TRANSPARENT LENS. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4.
PAGE 2
Selection Guide Part No. L-7104F3BT Dice Po (mW/sr) [2] @ 20mA *50mA Lens Type F3 (GaAs) Min. Typ. 7 28 *18 *70 Viewing Angle [1] 2θ1/2 34° BLUE TRANSPARENT Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max.
PAGE 3
L-7104F3BT SPEC NO: DSAB2739 REV NO: V.8 DATE: SEP/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.
PAGE 4
SPEC NO: DSAB2739 REV NO: V.8 DATE: SEP/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.
PAGE 5
SPEC NO: DSAB2739 REV NO: V.8 DATE: SEP/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.