Datasheet

SPEC NO: DSAI9730 REV NO: V.5A DATE: DEC/18/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029050

T-1 (3mm) SOLID STATE LAMP

Part Number: L-7104SEC-J3 Hyper Red

Features

z Low power consumption.

z Popular T-1 diameter package.

z General purpose leads.

z Reliable and rugged.

z Long life - solid state reliability.

z Available on tape and reel.

z RoHS compliant.

Description

The Hyper Red device is based on light emitting diode chip

made from AlGaInP.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

PAGE 1
T-1 (3mm) SOLID STATE LAMP Part Number: L-7104SEC-J3 Hyper Red Features Description z Low power consumption. The Hyper Red device is based on light emitting diode chip z Popular T-1 diameter package. made from AlGaInP. z General purpose leads. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-7104SEC-J3 Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) Water Clear Viewing Angle [1] Min. Typ. 2300 4100 *1300 *2400 2θ1/2 34° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
Hyper Red L-7104SEC-J3 SPEC NO: DSAI9730 REV NO: V.5A DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 4
PACKING & LABEL SPECIFICATIONS L-7104SEC-J3 SPEC NO: DSAI9730 REV NO: V.5A DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 5
SPEC NO: DSAI9730 REV NO: V.5A DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 6
SPEC NO: DSAI9730 REV NO: V.5A DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.