Datasheet

SPEC NO: DSAE7180 REV NO: V.4 DATE: NOV/17/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Description

The Yellow source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide

Yellow Light Emitting Diode.

P/N: L-710A8EW/1YD YELLOW

T-1 (3mm) RIGHT ANGLE LED INDICATOR

Features



I.C. COMPATIBLE.



BLACK CASE ENHANCES CONTRAST RATIO.



WIDE VIEWING ANGLE.



HIGH RELIABILITY LIFE MEASURED IN YEARS.



UL RATING : 94V-0.



HOUSING MATERIAL: TYPE 66 NYLON.



RoHS COMPLIANT.

PAGE 1
T-1 (3mm) RIGHT ANGLE LED INDICATOR P/N: L-710A8EW/1YD YELLOW Description Features I.C. COMPATIBLE. The Yellow source color devices are made with BLACK CASE ENHANCES CONTRAST RATIO. Gallium Arsenide Phosphide on Gallium Phosphide WIDE VIEWING ANGLE. Yellow Light Emitting Diode. HIGH RELIABILITY LIFE MEASURED IN YEARS. UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.
PAGE 2
Selection Guide Part No. Dice L-710A8EW/1YD Iv (mcd) @ 10mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 5 12 40° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow L-710A8EW/1YD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE7180 REV NO: V.4 DATE: NOV/17/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.