Datasheet

SPEC NO: DSAF5500 REV NO: V.2 DATE: JAN/29/2008 PAGE: 1 OF 3

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101007835

10mmx16mm LIGHT BAR

Part Number: L-885/6IDT High Efficiency Red

Features

z UNIFORM LIGHT EMITTING AREA.

z EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY

STANDARD SOCKETS.

z FLUSH MOUNTABLE.

z EXCELLENT ON/OFF CONTRAST.

z CAN BE USED WITH PANELS AND LEGEND MOUNTS.

z MECHANICALLY RUGGED.

z I.C. COMPATIBLE.

z BOTTOM SURFACE OF EPOXY IS NOT FLAT.

z RoHS COMPLIANT.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
0mmx16mm LIGHT BAR Part Number: L-885/6IDT High Efficiency Red Features Description z UNIFORM LIGHT EMITTING AREA. The High Efficiency Red source color devices are made with z EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY Gallium Arsenide Phosphide on Gallium Phosphide Orange STANDARD SOCKETS. Light Emitting Diode. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z MECHANICALLY RUGGED. z I.C. COMPATIBLE. z BOTTOM SURFACE OF EPOXY IS NOT FLAT.
PAGE 2
Selection Guide Part No. Dice L-885/6IDT Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 10mA Min. Typ. 2θ1/2 5 10 120° RED DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
High Efficiency Red L-885/6IDT SPEC NO: DSAF5500 REV NO: V.2 DATE: JAN/29/2008 PAGE: 3 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.