Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysSeven-segment display Green 7 mm 2.2 V No. of digits: 1 SA03-55GWA

SPEC NO: DSAB5460 REV NO: V.8 DATE: DEC/05/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1301000012

Package Dimensions & Internal Circuit Diagram

Description

The Green source color devices are made with

Gallium Phosphide Green Light Emitting Diode.

P/N: SA03-11GWA GREEN

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. Specifications are subject to change without notice.

7.62mm (0.3INCH) SINGLE DIGIT

NUMERIC DISPLAY

Features



0.3 INCH DIGIT HEIGHT.



EXCELLENT CHARACTER APPEARANCE.



EASY MOUNTING ON P.C. BOARDS OR SOCKETS.



I.C. COMPATIBLE.



MECHANICALLY RUGGED.



STANDARD : GRAY FACE,WHITE SEGMENT.



RoHS COMPLIANT.

Summary of content (4 pages)

PAGE 1
7.62mm (0.3INCH) SINGLE DIGIT NUMERIC DISPLAY P/N: SA03-11GWA Features GREEN Description 0.3 INCH DIGIT HEIGHT. The Green source color devices are made with EXCELLENT CHARACTER APPEARANCE. Gallium Phosphide Green Light Emitting Diode. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. I.C. COMPATIBLE. MECHANICALLY RUGGED. STANDARD : GRAY FACE,WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.
PAGE 2
Selection Guide Part No. Dice SA03-11GWA Iv (ucd) @ 10mA Lens Type GREEN(GaP) WHITE DIFFUSED Min. Typ. 1900 8000 Description Common Anode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.
PAGE 3
Green SA03-11GWA SPEC NO: DSAB5460 REV NO: V.8 DATE: DEC/05/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.
PAGE 4
PACKING & LABEL SPECIFICATIONS SA03-11GWA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB5460 REV NO: V.8 DATE: DEC/05/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.