User's Manual

ManualsBrandsKingdom ManualsAudio EquipmentBodyworn Wireless Microphone

Professional 200 Channel

UHF Wireless Microphone

Systems

Profesionales UHF Sistemas de Micrófono Inalámbrico

Professional Wireless Microphone Systems

PLL Diversity Wireless Systems

Please read and keep for future reference.

USERS MANUAL

FOR PROFESSIONAL UHF WIRELESS

MICROPHONE SYSTEMS:

(4 Mic Systems, 2 Mic Systems, and 1 Mic Systems)

719 SR 1001

Mansfield, PA 16933 U.S.A.

www.nuselldistributing.com

Product: Made in China Manual: Printed in China

Summary of content (8 pages)

PAGE 1
Professional 200 Channel UHF Wireless Microphone Systems Profesionales UHF Sistemas de Micrófono Inalámbrico Professional Wireless Microphone Systems PLL Diversity Wireless Systems USERS MANUAL FOR PROFESSIONAL UHF WIRELESS MICROPHONE SYSTEMS: (4 Mic Systems, 2 Mic Systems, and 1 Mic Systems) 719 SR 1001 Mansfield, PA 16933 U.S.A. www.nuselldistributing.com Product: Made in China Manual: Printed in China Please read and keep for future reference.
PAGE 2
Congratulations on Purchasing an AVTronics Wireless Microphone System! This product should give you trouble free service throughout it's life. We trust you will enjoy it's performance. FCC INFORMATION 4 MIC RECEIVER: AVT4MR Kingdom Inc. AVT4MR THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
PAGE 3
GETTING STARTED Step 1: Put 2 batteries into each of your transmitters. The handheld takes 2 AA batteries and the battery compartment can be located by unscrewing the bottom of the handle. The beltpack takes 2 AA batteries and the compartment can be located by swinging open the door. See diagrams on pages 10 and 11. Step 2: Attach the two antennae to the back of your receiver. Attach by screwing onto the receiver in the proper location.
PAGE 4
HELPFUL DIAGRAMS Four Microphone System Four Microphone System A. Receiver Controller - Use the receiver controller to toggle through options, select channels (A through D) and set the frequencies of the transmitters. B. Group Select - By selecting this option via the receiver controller you can select a group of preset frequencies for all 4 of your transmitters/receiver channels. Each transmitter would still need to go through the IR Sync function if not already in Sync. AVT4MR Receiver C.
PAGE 5
HELPFUL DIAGRAMS Two Microphone System One Microphone System Note: Please follow the operation instruction based on the Four Mic System. Note: Please follow the operation instruction based on the Four Mic System.
PAGE 6
HELPFUL DIAGRAMS AVTBPT1 Beltpack Transmitter AVTHHT1 Handheld Transmitter Hold power button for 3 seconds to power on. Battery Compartment Hold buttons on both sides to open battery compartment. Then insert 2 AA batteries.
PAGE 7
IR SYNCING TROUBLESHOOTING Four Microphone System is shown below. See pages 6-9 to find the IR Sync location for the receiver you have purchased. PROBLEM Receiver • No sound • No lights AVTHHT1 HANDHELD TRANSMITTER Four Microphone System IR Window Location 1) Turn on the power button/switch. May need to hold for 3 seconds to power on. 2) Plug in the AC power adapter. 3) Check to see if the AC power adapter is loose. Check on the receiver end and wall outlet end. 1) The transmitter is out of range.
PAGE 8
SOLUCIÓN DE PROBLEMAS PROBLEMA Recibidor • No sonido • No luces Micrófono • No sonido • Luces encendidas Sonido • Sonido distorsionado • Retroalimentacion o feedback • Caída de señal o drop out POSIBLE CAUSA SOLUCIÓN 1 ) El botón de poder esta en la posición de APAGADO. 2) Adaptador de electricidad AC no esta conectado. 3) Conexión pobre del adaptador de electricidad. 1) Encienda el botón o switch. Es posible que necesite presionarlo par 3 segundos para que encienda.