Installation Manual

Kingfisher Company, inc. STAR-ELT Manual
KCi #99420-MAN Rev 0.6 Page 10 of 29
a. turn on the Circuit breaker
observe green AC Power
LED.
b. Connect batteries
4. If powering from an FM approved
24VDC source, turn on DC power
3. Disconnect Antenna Coax Cable from
STAR-ELT Transmitter Module
9. STAR-ELT Basic Connections
There are several basic field wiring connections that must be made to the STAR-ELT modules.
Figure 4: STAR-ELT Main Board
J3-J4 FACP
Power Isolator
Module
TB2 Zone
1-4 Inputs
TB3 FACP
24VDC
Power
J7 Optional
AC Power
Supply
SW2
Reset
Switch
SW1 Test /
Program
Button
J1 Antenna
TB1 Trouble
Relay