Installation Manual

Kingfisher Company, inc. STAR-ELT Manual
KCi #99420-MAN Rev 0.6 Page 17 of 29
Figure 9 : STAR-ELT Optional AC Power Supply
13.1 Battery
Battery terminals allows the connection of a standard 7AH sealed lead acid gel cell for use as a
secondary power source. This battery is charged and monitored by the optional power supply.
13.2 Battery Fuse (F3)
Battery Fuse 2ASB (KCi #30040) is located in the lower right hand corner of the power supply
board. This fuse protects the board in the event of a battery overcurrent or reversed connection
condition.
Figure 10 : STAR-ELT Battery Connector and Fuse (Optional AC Supply)
13.3 AC Power Indicator (LED1)
The green LED is constantly illuminated when AC power is provided to the interface board.
AC Line Input
TB1-1 AC Hot
TB1-2 AC Ground
TB1-3 Neutral
J1 Battery
STAR-ELT
Main Board
F3 Battery
Fuse
Battery
Fuse F3
F1 AC Fuse
LED1 AC
Power ON
LED2
Power Fail
Battery
J1 Battery
LED2 Power
Fail (AC or
Battery)