Installation Manual

Kingfisher Company, inc. STAR-ELT Manual
KCi #99420-MAN Rev 0.6 Page 29 of 29
19.3 Ordering Information
KCi #
Model #
Description
99420
STAR-ELT-PSE
STAR-ELT Transmitter— 120VAC Line Power (backup battery required)
99421
STAR-ELT
STAR-ELT Transmitter— +24VDC Power from FM Approved FACP
Options
66320
STAR-ELT-MB
STAR-ELT Main Board—Field Replacement Kit
66321
STAR-ELT-PS
STAR-ELT 120VAC Power Supply— Field Replacement Kit
66324
STAR-ELT-IM
STAR-ELT 24VDC Power Isolation Module—Field Replacement Kit
97953
FPF
Factory Programmed Frequency—Required at time of order (no charge)
Kingfisher Company, inc. products must be used within their published specifications and must be PROPERLY specified, applied,
installed, operated, maintained, and operationally tested in accordance with their installation instructions at the time of installation
and at least twice a year or more often and in accordance with local, state, and federal codes, regulations, and laws. Specification,
application, installation, operation, maintenance and testing must be performed by qualified personnel for proper operation in
accordance with all of the latest National Fire Protection Association (NFPA), Underwriters’ Laboratories (UL), National Electrical
Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other
applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and
amendments and the requirements of the local authority having jurisdiction (AHJ).
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in
accordance with Kingfisher Company, inc. standard terms and conditions
Kingfisher Company, inc. 81 Old Ferry Road - Lowell, MA 01854
Phone: [phone] Fax: [phone] www.kfci.com