User Manual

9
Option 2 Gravity Drain Hose
1.
2. Remove bucket from the unit as instructed.
3.
4.
Thread the drain hose onto the nozzle and make
sure it's securely locked.
Hose is not provided, so user shall prepare it in advance.
[Size: The hose thread should have an outer diameter of 11/16 inches (1.0625
inches or 27.0mm), and a pitch of 11.5 TPI.]
Replace the bucket. Make sure the drain hose goes through the bucket's drain
hole and is placed downward. Lead the hose to the floor drain and then cove
the hole with a lid. Note that drain hose should not be pressed, otherwise
water can not be drained out.
NOTICE:
When you want to take off the drain hose, prepare a receptacle to
collect water from the nozzle.
Note:Actual product may be different from above graphics, please refer to actual product.