User Manual

Option 3 Pump Drain
 In the option 3, the unit must be running under PUMP mode. Please refer to
the instructions in page 6 for operation.
 The maximum distance and the rise may be 5m from the unit. Exceeding this
1. Pull the rubber plug to remove from drainage joint.
 The dehumidifier will turn off automatically when the bucket is full, or when

the bucket is removed or not replaced in the proper position.
The bucket must be replaced in the proper position for the dehumidifier to
distance may damage the unit or cause leaks. When the water in water tank
reaches a certain level, the pump will start pumping automatically.
2. Insert the drainage hose into the hole.
work. The light will be on and the dehumidifier will not run if the bucket is
not in the proper position.
3.
10
NOTICE:
Place the other end of the drain hose in the location you want the water to
go to: a floor drain, a water container, or through a basement window to the
outdoors.
ʓ
ʒ