Manualshelf

User Manual

ManualsBrandskingneed ManualsCar & Vehicle ElectronicsOriginal Universal GPS Head Up Display Speedometer Odometer Car Digital Speed Display MPH Over Speeding Alarm Car Clock for All Vehicles C60/C60S/C80/C90 (C80-1)
123
4. Operation Guide:
1) Set over-speed alarm rate
A: Short press the “Enter” button one time, show 001.
B: Slide “up” or “down” key to adjust the alarm speed.
C: The default alarm speed rate is 120 km /H.
2) Driving speed calibration
A: Short press twice the “Enter” button, show 002
B: Slide “up” or “down” key to adjust the speed rate display, default rate is 665, the range is 650 to 669.
3) Altitude value calibration:
A: Short press the “Enter” button three times, show 003
B: Slide “up” or “down” key to adjust the Altitude value. The default value is 850. Each time you slide the key, the altitude
will be increased by 5 meters or decreased by 5 meters. The setting range of calibration value is 750-950.
4) Set the speed meter unit (KM or Mile):
A: Long press the "Enter" button, when the left side of the screen lights up "ML" means the speed is displayed in miles.
B:Long press the “Enter” button, when the left side of the screen lights up, "KM" means the speed is displayed in
kilometers.
5) Screen display Settings
A: Long press the “up” key, the screen only displays the driving speed.
B:Long press the “down” key, the screen shows the driving speed and the driving time, total mileage and the current
altitude.
6) Factory defaults:
Short press the "Enter" button 4 times, and slide the “down” key when displaying 004 to restore the factory defaults and
clear the total mileage.
5. Fatigue Driving Alarm
In every hour, system will trigger a fatigue driving alarm with continuous driving time displayed, in order to remind driver
to avoid drowsy-driving.
Example: 001 means one-hour continuous driving, 002 means two-hour continuous driving and so on.
6. Data display
A: Single driving mileage: In the case of continuous power supply, the driving mileage is continuously accumulated. It will
be cleared when power off.
B: Single driving time: In the case of continuous power supply, the driving time is continuously accumulated. Unit is
minutes. It will be cleared when power off.
C: Total mileage: the total mileage will be flashing display when car stops, and data will be saved even power is cut off, the
maximum total mileage display is 9999 kilometers, which will be automatically clear after reaching the maximum value.
D: Altitude:
The altitude unit is meter, the altitude value deviation range is 20~100 meters.
7. Technical parameters:
1) GPS positioning time: 1 to 5 minutes in the open air (The bad weather will affect the positioning time).
There is no GPS signals indoors.
2) Speed deviation: Since the speed data comes from the GPS satellite, slight deviation is unavoidable.
3) Input voltage: DC 5V Input current: DC 50-120mA Power bank for power supply is supported.
4) Working temperature: -30 to 70 degree
5) Driving data deviation is around 2%
6) All driving data will be cleared when power off except the total mileage.