USER MANUAL KBU-25 / 50 / 100 / 170 SINGLE ZONE MODELS CAREL controller COMPRESSOR REFRIGERATORS www.kingsbottle.
CONTENTS TABLE OF CONTENTS Congratulations ! ! Thank you for choosing KingsBottle refrigerators. Do not operate this appliance for a minimum of 2 hours once the unit is located in its final position. ! We are sure you will find your new appliance an absolute pleasure to use and that it will bring you many years of trouble-free operation.
5#('6; SAFETY 5#('6; +/2146#06 5#('6; +05647%6+105 +/2146#06 5#('6; +05647%6+105 +/2146#06 5#('6; +05647%6+105 +/2146#06 5#('6; +05647%6+105 +/2146#06 5#('6; +05647%6+105 0LEASE¬READ¬THE¬USER¬MANUAL¬CAREFULLY¬AND¬STORE¬IN¬A¬HANDY¬ WARNING place forWARNING later reference. WARNING The must into The symbols you will see in be this booklet have these meanings: The refrigerator refrigerator must be plugged plugged into its its own own WARNING dedicated 220-240V, 50Hz AC electrical outlet.
FEATURES PART II DIAGRAM & DESCRIPTION OF REFRIGERATOR 1 Control board 2 Housing 3 Ventilation DC Fan 4 Shelf 5 Front grill 6 Door hinge 7 8 9 Controller Door Adjustable stand feet YOUR REFRIGERATOR ALSO INCLUDES TWO KEYS TO OPERATE THE ROUNDED LOCKING MECHANISM WHICH IS SHOWN AT THE LOWER CENTRE POSITION OF THE DIAGRAM. COMPRESSOR REFRIGERATORS www.kingsbottle.
INSTALLATION PART III INSTALLATION INSTRUCTIONS CUTOUT DIMENSION ILLUSTRATED KBU-170 SERIES 23.54”W x 26.97”D x 71.69”H (598W x 685D x 1821H mm) Included stand height 0.98”(25mm) KBU-100 SERIES 23.54”W x 26.97”D x 55.43”H (598W x 685D x 1408H mm) Included stand height 0.98”(25mm) MODEL WIDTH DEPTH HEIGHT KBU-25 494 mm 595 mm 841 mm KBU-50 23.42” 595mm 23.62” 600mm 33.86” 860mm 0.79” 20mm KBU-100 23.54” 598mm 26.97” 685mm 55.43” 1408mm 0.98” 25mm KBU-170 23.54” 598mm 26.
INSTALLATION PART III INSTALLATION INSTRUCTIONS A. GENERAL INSTALLATION INSTRUCTIONS 1. These appliances can be used as a free standing or built-in unit. See the minimum clearances for built-in usage. 2. Place your refrigerator on a flat solid floor that is strong enough to support the unit when it is fully loaded. To level your refrigerator, adjust the levelling screw-in feet at the bottom of the unit. 3. When moving or relocating your refrigerator do not incline the unit on more than a 45 degree angle.
UP / POWER SET / MUTE DOWN / LIGHT KEYBOARD : • UP/POWER: Increase the value / holding the button for at least 3 seconds, powers the unit ON or OFF. • DOWN/LIGHT: decrease the value / holding the button for at lest half a seconds turns the interior light ON or OFF. • SET/MUTE: Use SET after selecting values withe the up and down arrows / alarm mute button. DISPLAY: COMPRESSOR FIGURE FAN DEFROST ALARM LEDS AND ASSOCIATED FUNCTIONS: WIRING DIAGRAM: ! www.kingsbottle.
OPERATION ADJUST TEMPERATURE 1. Press the “SET / MUTE” button for more than 3 sec. ,the display shows the parameter code “ST/ VALUE/PS/0” , 0 is the PASSWORD. 2. Release the button when it shows ST/0. 3. Use the “UP” and “DOWN” buttons to adjust the temperature. 4. Press SET / MUTE button, or if no button is pressed for 5 seconds, the change of setting is saved and the DISPLAY will show the actual temperature.
TABLE OF PARAMETERS CODE DESCRIPTION MIN MAX UOM DEFAULT PS password PROBE PARAMETERS 0 200 - 22 /2 15 - 10 3 - 1 /5 probe measurement stability 1 select probe/input displayed ( /4=1, display air probe; /4=2, display evaporator 1 probe; /4=3, display the status of LED figure ON or OFF) select °C/°F (0= °C; 1= °F ) 0 1 - 1 /6 disable decimal point 0 1 - 1 /C1 probe 1 offset -12,7 12,7 (°C/°F) / 10 1.
OPERATION TABLE OF ALARMS ALARM CODE DESCRIPTION LO low temperature alarm HI high temperature alarm E0 probe 1 error=control E1 probe 2 error=defrost E3 enter defrost status d12 twice continuously dF defrost running dor open door alarm EE unit parameter error EF operating parameter erro TEMPERATURE SETTINGS FOR WINE AND BEVERAGES ! Different varietals of wine require different temperature settings.
STORAGE PART V LAYOUT AND STORAGE YOUR CABINET WAS DESIGNED TO STORE A MAXIMUM NUMBER OF BOTTLES SECURELY. WE RECOMMEND THAT YOU OBSERVE THE TIPS BELOW TO OPTIMIZE LOADING. 1. Disperse your bottles evenly so as not to concentrate weight in any one area. Also, be careful that your bottles do not touch either the back of the cabinet or the step at the bottom. 2. Ensure that the bottles are not all grouped together at the top or bottom of the cabinet. 3. Never try to pull out more than one shelf at a time.
MAINTENANCE +/2146#06 5#('6; +05647%6+105 5#('6; WARNING The refrigerator must be plugged into its own dedicated 220-240V, 50Hz AC electrical outlet. PART VI CARE AND MAINTENANCE 0LEASE¬READ¬THE¬USER¬MANUAL¬CAREFULLY¬AND¬STORE¬IN¬A¬HANDY¬ The plug must be accessible when the refrigerator is place for later reference. in position. The symbolsYOUR you will see in this booklet have these meanings: CLEANING REFRIGERATOR It is essential the power point is properly earthed to ground.
TROUBLESHOOTING GUIDE PART VII PROBLEM Refrigerator does not operate Refrigerator is not cold enough; can not cool down to the preset temp. TROUBLESHOOTING GUIDE POSSIBLE CAUSE 1. Not plugged in 2. The appliance is turned OFF at the control panel 3.
TECHNICAL DATA PART X TECHNICAL DATA MODEL NO.
NOTE ! www.kingsbottle.
WARRANTY PART IX WARRANTY INFORMATION Please speak to your Retailer before calling BTO AMERICA LIMITED (also known as KingsBottle) if you did not purchase your Beverage Cooler directly from BTO AMERICA LIMITED ! Limited warranty – If your refrigerator is not operating, KingsBottle reserves the right to repair or replace the refrigerator. KingsBottle may request the consumer to contact a local refrigeration company to service the refrigerator.