22.5” Charcoal Grill Owner’s Manual Assembly and Operating Instructions Model # OG2001901-KF Tools required for assembly (Not Included): Pliers, Philips & Flathead Screwdrivers and Adjustable Wrench. This instruction manual contains important information necessary for the proper assembly and safe use of the appliance. Read and follow all warnings and instructions before assembling and using the appliance. Follow all warnings and instructions when using the appliance.
WARNING Only use this grill on a hard, level, non-combustible, stable surface (concrete, ground, etc.) capable of supporting the weight of the grill. Never use on wood or other surfaces that could ignite. DO NOT use grill without charcoal grid in place. DO NOT attempt to remove charcoal grid while coals are hot.
WARNING 1. 2. When grilling, grease from meat may drip into the charcoal and cause a grease fire. If this should happen, close lid to suffocate the flame. Do not use water to extinguish grease fires. Use caution when opening the lid, keeping hands, face and body a safe distance away. Flash flare ups may occur when air comes into contact with fire or hot coals. Never place more than 3.9 pounds (1.8 kg) of charcoal inside the grill.
THANK YOU FOR PURCHASING 22.5” CHARCOAL GRILL Read all safety warnings & assembly instructions carefully before assembling or operating your grill. STOP! DO NOT RETURN TO RETAILER. For assembly assistance, missing or damaged parts, please call RANKAM customer service at 1–888–837–1380, 8:00 am to 5:00 pm, Pacific Standard Time, Monday – Friday (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged.
Components List 1. Air Vent 2. Lid 3. Warming Rack 1 pc 4. Cooking Grate 1pc 5. Charcoal Grid 1pc 6.1L. Left Lid 6.1R. Right Lid Hinge Hinge 1pc 1pc 6.2L. Left Body 6.2R. Right Hinge 1pc 7. Grill Body 1pc 1pc 8. Leg Bowl Body Hinge 1pc 9A. Ash Catcher 9B. Ash Catcher Handle 1pc 10. Back Leg 4pcs 11. Wire Rack 1pc 14. Handle 2pcs 15. Condiment Rack 2pcs OG2001901-KF English 1pc 12. Wheel 2pcs 13.
Hardwares List Bolt (M6 x 10) A 8pcs Bolt (M5 x 12) 1pc B C Attention: This bolt is pre-assembled on each grill leg. Bolt (M6 x 24) 4pcs Nut (M6) D 14pcs E Nut (M5) 1pc F Nut (M8) 2pcs Washer (M6 x 12mm Dia.) G 14pcs Washer (M6 x 19mm Dia.) 4pcs H I Attention: This washer is pre-assembled on each grill leg. Washer (M6 x 25mm Dia.
Assembly Instruction Step 1: Assemble Leg Bowl (8), Front Leg (13) and Back Leg (10) to Grill Body (7) by inserting 4pcs bolt (C) and 4pcs washer (I). Step 2: 1. Insert the short end of Wire Rack (11) into the hole of Front Leg (13) by using 2pcs washers (G) and 2pcs nuts (D). 2. Insert the long end of Wire Rack (11) into the hole of Back Leg (10), then attach the Wheels (12) to the end by using 2pcs washers (J) and 2pcs lock nuts (F).
Step 3: 1. Align holes in Left Lid Hinge (6.1L) with holes in Left Body Hinge (6.2L), insert hinge pin (K) to connect hinges and insert cotter pin (L) in holes of hinge pin. Repeat this step for Right Lid Hinge and Right Body Hinge (6.1R & 6.2R). 2. Assemble the Left and Right Hinge to Grill Body (7) by inserting 4pcs bolts (A), 4pcs washers (G) and 4pcs nuts (D). 3. Attach the Handle (14) to Grill Body (7) by using 2pcs insulating washers (H), 2pcs washers (G) and 2pcs nuts (D). 14 Step 4: 1.
Step 5: Attach the Lid (2) to the Hinge by using 4pcs bolts (A), 4pcs washers (G) and 4pcs nuts (D). Step 6: 1. Place Charcoal Grid (5) and Cooking Grate (4) into the Grill Body. 2. Insert the end of the Warming Rack (3) into holes of the Grill Body and Lid. 3. Attach Ash Catcher Handle (9B) to Ash Catcher (9A) by using 2pcs bolts (M). 4. Place the Ash Catcher Assembled under the Grill Body.
Step 7: 1. Attach the Condiment Rack (15) to Front Legs. 2. Tighten All Hardware. 15 Step 8: Finished.
WARNING DO NOT use grill without charcoal grid in place. DO NOT attempt to remove charcoal grid while grill contains hot coals. WARNING Place the grill outdoors on a hard, level, non-combustible surface away from roof overhang or any combustible material. Never use on wood or other surfaces that could burn. Place the grill away from open windows or doors to prevent smoke from entering your house. In windy weather, place the grill in an outdoor area that is protected from the wind.
NOTE: To extend the life of your grill, make sure that hot coals and wood do not touch the walls of grill. IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5. If you choose to use charcoal lighting fluid, ONLY use charcoal lighting fluid approved for lighting charcoal. Do not use gasoline, kerosene, alcohol or other flammable materials for lighting charcoal. Follow all manufacturer’s warnings and instructions regarding the use of their product. Start with 3.9 pounds (1.8 kg) of charcoal.
WARNING DO NOT use grill without charcoal grid in place. DO NOT attempt to remove charcoal grid while grill contains hot coals. NOTE: To extend the life of your grill, make sure that hot coals and wood do not touch the walls of grill. IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5. If you choose to use charcoal lighting fluid, ONLY use charcoal lighting fluid approved for lighting charcoal. Do not use gasoline, kerosene, alcohol or other flammable materials for lighting charcoal.
Flavoring Wood To obtain your favorite smoke flavor, experiment by using chunks, sticks or chips of flavor producing wood such as hickory, pecan, apple, cherry, or mesquite. Most fruit or nut tree wood may be used for smoke flavoring. Do not use resinous wood such as pine as it will produce an unpleasant taste. Wood chunks or sticks 3” to 4” (7 to 10 cm) long and 1” to 2” (2 to 4 cm) thick work best.
Step 4 When charcoal is burning strong again, wear oven mitts / gloves and carefully return charcoal grid to grill body with lifter. Extinguish any hot ashes, coals or embers which may have fallen from the grill or beneath and around grill. AFTER-USE SAFETY WARNING Always allow grill and all components to cool completely before handling. Never leave coals and ashes in grill unattended. Make sure coals and ashes are completely extinguished before removing.
LIMITED WARRANTY 1. Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of 1 Year from the date of purchase, PROVIDED claims are submitted, in writing, with proof of purchase. 2.
