Kingsford Professional 36 Inch Ranchers XL Smoker & Charcoal Grill Owner’s Manual Assembly and Operating Instructions Model # SC2263901-KF Tools required for assembly: (Not Included) Pliers, Philips & Flathead Screwdrivers, Adjustable Wrench. Keep this manual for future reference. SC2263901-KF - ENG 1 of 23 20170614-V1.
! WARNING ! Only use this grill on a hard, level, non-combustible, stable surface (concrete, ground, etc.) capable of supporting the weight of the grill. Never use on wooden or other surfaces that could burn. DO NOT attempt to remove charcoal grate/tray while coals are hot. When grill is in use, keep clearance of 36” between the hot grill and any combustible materials, such as bushes, trees, wooden decks, wooden fences, buildings, etc.
WARNING ! ! Use caution during assembly and while operating your grill to avoid scrapes or cuts from sharp edges of metal parts. Use caution when reaching into or under grill. When opening lid, be sure lid is fully opened and secure to prevent lid from closing unexpectedly. In windy weather, place grill in an outdoor area that is protected from the wind. Close lid to suffocate flame.
ASSEMBLY INSTRUCTIONS THANK YOU FOR PURCHASING THIS KINGSFORD PROFESSIONAL 36” RANCHERS XL SMOKER & CHARCOAL GRILL Read all safety warnings & assembly instructions carefully before assembling or operating your grill. For missing parts, please contact customer service at customerservice@rankam.com or at 888-837-1380 (U.S. only), Mon to Fri, 8:00 a.m. – 5:00 p.m. Pacific Standard Time. (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged.
Component List 1. Main Chamber Lid 1a: coil – 1 pc 1b: nut - 2 pcs 1c: rod - 1 pc 2. Main Chamber Body 1 pc 5. Firebox 1 pc 6. Firebox Door 1 pc SC2263901-KF - ENG 3. Firebox Lid Support 1 pc 7. Firebox Door Handle 1 pc 5 of 23 4. Firebox Lid 4a: coil - 1 pc 4b: nut – 2 pcs 4c: rod - 1 pc 1 pc 8. Firebox Air Vent 1 pc 1pc 20170614-V1.
9. Firebox Bracket 10. Firebox Cooking Grate 1 pc 13. Wheel Axle 2 pcs 14. Firebox Front Table 1 pc 17. Main Chamber Front Table 18. Front Table Bracket 1 pc 25. Grease Bucket Hanger 15. Main Chamber Top Cooking Grate 19. Bottom Rack 16. Main Chamber Bottom Cooking Grate 3 pcs 20. Left Front Leg 1 pc 23. Right Rear Leg 1 pc 26. Side Pull Handle 2 pcs 3 pcs 2 pcs 22. Right Front Leg 12. Wheel 1 pc 1 pc 1 pc 21. Left Rear Leg 11. Charcoal Grate 1 pc 24.
Hardware List Item No. Item name Diagram Qty A Bolt M8 x 16 43 B Nut M8 44 C Bolt M6 x 14 8 D Lock Nut M12 2 E Shoulder Bolt M8 x 18 2 F Lock Nut M8 1 G Spring Washer 8 mm dia. 1 H Washer 6 mm dia. 1 I Bolt M5 x 10 1 J Hex Nut Wrench 1 K Screwdriver 1 For assembly assistance, missing or damaged parts, please contact customer service at customerservice@rankam.com or at 888-837-1380. DO NOT RETURN TO RETAILER SC2263901-KF - ENG 7 of 23 20170614-V1.
Assembly Procedures Step 1. Assemble 4 legs (Part # 20,21,22,23) using 16 pcs of Bolt M8 x 16 (A) and 16 pcs of Nut M8 (B) on Main Chamber Body (Part #2). Only Hand Tighten bolts and nuts in this step. #2 #21 Left Rear Leg Front #20 Left Front Leg #23 Right Rear Leg #22 Right Front Leg B A SC2263901-KF - ENG 8 of 23 20170614-V1.
Step 2. Insert Wheel Axle (Part #13) through the holes on Right Front Leg (Part #22) and Right Rear Leg (Part #23) #13 Step 3. Insert Wheels (Part #12) through Axle (Part #13) and lock with 2 pcs of Lock Nut M12 (D) #12 D #12 D Step 4. Assemble Bottom Rack (Part #19) using 4 pcs of Bolt M6 x 14 (C) through the holes on legs. Tighten bolts and nuts on legs in Step #1 C C #19 C SC2263901-KF - ENG 9 of 23 20170614-V1.
Step 5. Assemble Side Handle (Part #26) using 4 pcs of Bolt M8 x 16 (A) and 4 pcs of Nut M8 (B) on Main Chamber Body (Part #2). #26 B A Step 6. Assemble Smoke Stack (Part #27) using 4 pcs of Bolt M8 x 16 (A) and 4 pcs of Nut M8 (B) to Main Chamber Body (Part# 2) #27 B A SC2263901-KF - ENG 10 of 23 20170614-V1.
Step 7. Assemble Main Chamber Front Table (Part #17) using 2 pcs of Bolt M8 x 16 (A) and 2 pcs of Nut M8 (B) on Main Chamber Body (Part #2) #17 B A Step 8. Assemble Front Table Brackets (Part# 18) using 2 pcs of Bolt M6 x 14 (C) on Front Table (Part # 17). Then use 2 pcs of Bolt M8 x 16 (A) and 2 pcs of Nut M8 (B) to assemble on Main Chamber Body (Part# 2) #18 C B A SC2263901-KF - ENG 11 of 23 20170614-V1.
Step 9. Insert Temperature Gauge (Part #24) to Main Chamber Lid (Part #1). #24 #1 Step 10. Assemble Firebox (Part #5) using 8 pcs of Bolt M8 x 16 (A) and 8 pcs of Nut M8 (B) to Main Chamber Body (Part #2) B #5 A Suggestion: follow numeric sequence (#1,2,3,4,5,6,7,8) to attach bolts and nuts to attach firebox to main chamber 7 4 3 1 2 5 6 8 SC2263901-KF - ENG 12 of 23 20170614-V1.
Step 11. Assemble Firebox Bracket (Part #9) using 2 pcs of Bolt M6 x 14 (C) through the holes on Right Front Leg (Part #22) and Right Rear Leg (Part #23). Then use 1 pc of Bolt M8 x 16 (A) and 1 pc of Nut M8 (B) to assemble on Firebox (Part #5) #9 B A C Step 12. Assemble Firebox Front Table (Part #14) using 4 pcs of Bolt M8 x 16 (A) and 4 pcs of Nut M8 (B) on Firebox (Part #5) #14 A B SC2263901-KF - ENG 13 of 23 20170614-V1.
Step 13. Assemble Firebox Lid Support (Part #3) using 2 pcs of Bolt M8 x 16 (A) and 2 pcs of Nut M8 (B) on Firebox (Part #5) A #3 B Step 14. Assemble Firebox Lid (Part #4) using 1 pc of Bolt M5 x 10 (I) and 1 pc of Washer M6 (H) on Firebox (Part #5) I #4 H Step 15. Insert Firebox Door (Part #6) onto the Firebox (Part #5).
Step 16. Assemble Firebox Door Handle (Part #7) using 1 pc of Shoulder Bolt M8 x 18 (E) and 1 pc of Lock Nut M8 (F) on Firebox Door (Part #6) E F #7 Step 17. Place Main Chamber Bottom Cooking Grates (Part #16) into Main Chamber Body (Part #2) #16 SC2263901-KF - ENG 15 of 23 20170614-V1.
Step 18. Place Top Cooking Grates (Part #15) on the support rims of Main Chamber Body (Part #2) Step 19. Place Firebox Charcoal Grate (Part#11) into Firebox (Part #5) Step 20. Place Firebox Cooking Grates (Part # 10) on the support rims of Firebox (Part #5) Step 21. Hook Grease Bucket Hanger (Part #25) to the holes on bottom of Main Chamber Body (Part #2) Assembly is now completed. Make sure all bolts and nuts are tightened before use. SC2263901-KF - ENG 16 of 23 20170614-V1.
! WARNING ! Place the grill outdoors on a hard, level, non-combustible surface away from roof overhang or any combustible material. Never use on wooden or other surfaces that could burn. Place the grill away from open windows or doors to prevent smoke from entering your house. In windy weather, place the grill in an outdoor area that is protected from the wind. ! WARNING ! Read all safety warnings and instructions carefully before operating your grill.
of charcoal grate of offset firebox. Step 3 Saturate charcoal with lighting fluid. With lid open, wait 2 to 3 minutes to allow lighting fluid to soak into charcoal. Store lighting fluid a safe distance from the grill. Step 4 With grill lid open and charcoal grate/tray completely placed inside the grill. Stand back and carefully light charcoal. Allow to burn until covered with a light ash (approximately 20 minutes).
! WARNING ! DO NOT use grill without charcoal grate/tray in place. DO NOT attempt to remove charcoal grate while grate/tray contains hot coals. NOTE: to extend the life of your grill, make sure that hot coals and wood do not touch the walls of grill. IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5. If you choose to use charcoal lighting fluid, ONLY use charcoal lighting fluid approved for lighting charcoal. Do not use gasoline, kerosene, alcohol or other flammable materials for lighting charcoal.
Cooking” section of this manual to avoid injury while adding wood. Regulating Heat To increase heat, add more wood and/or charcoal. Follow instructions in “Adding Charcoal/Wood During Cooking” section of this manual. To maintain the temperature, you may need to add more wood and/or charcoal during the cooking cycle. NOTE: Dry wood burns hotter than charcoal, so you may want to increase the ratio of wood to charcoal to increase the cooking temperature.
AFTER-USE SAFETY ! WARNING ! Always allow grill and all components to cool completely before handling. Never leave coals and ashes in grill unattended. Make sure coals and ashes are completely extinguished before removing. Before grill can be left unattended, remaining coals and ashes must be removed from grill. Use caution to protect yourself and property. Place remaining coals and ashes in a non-combustible metal container and completely saturate with water.
LIMITED WARRANTY 1. Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of 90 days from the date of purchase, PROVIDED claims are submitted, in writing, with proof of purchase. 2.
Optional Custom Cover Available Please visit www.homedepot.com for more information Model #: AC2277001-KF 36 Inch Ranchers XL Grill Cover Should you encounter any problem or Obtaining replacement parts CALL US FIRST Do not return product to the store WE CAN HELP Rankam (China) Manufacturing Co. Ltd. 18/F., New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong Please contact Customer Service at: customerservice@rankam.
