Quick Start Guide KingSlim D1 Pro Dash Cam V1.0 Please read this manual before operating your car dash camera, and keep it for further reference.
CONTENTS What’s in the Box 1 Camera Overview 2 Installation 3 Formatting the microSD Card 7 Download the App and GPS Player 8 Use the “Roadcam” App 9 User Manual 12 Contact Us 12
WHAT'S IN THE BOX CAMERA OVERVIEW 1 D1 Pro D1 Pro Dash Cam * 1 Car Charger with External GPS * 1 Bracket * 1 2 4 3 5 USB Cable * 1 32GB MicroSD Card * 1 GPS Electrostatic Stickers * 2 6 D1 Pro Quick Start Guide KingSlim D1 Pro Dash Cam V1.0 Car Crowbar * 1 Cable Clips * 5 Quick Start Guide * 1 10 7 8 Note: The USB cable is only used to connect the computer and the dash camera to read the card.
1 USB Power Port 7 IR LEDs & Indicator light 2 Bracket Slot 8 Screen 3 Front Camera 2. Take the film off from the suction cup. 9 Inside Camera 4 Power Button 10 Speaker 5 Microphone 11 Reset 6 MicroSD Card Slot 12 Set Buttons 13 Wifi Button Note: Short pressing the power button also can switch images of the front or inside showed alone or front and inside displayed simultaneously on-screen. 1 INSTALLATION 3 2 1. Insert the microSD Card. 3.
Cable clip GPS Electrostatic Stickers GPS D1 Pro 3 D1 Pro 4 4. Firstly clean the windshield with a dry cloth, secondly put and press the suction cup on the windshield to make sure there is no air inside the suction cup, last rotate to fix the bracket. (when install, please don’t let the rearview mirror block the camera's infrared light.) 5. Adjust the viewing angle of the dash cam to get a good view. 6.
FORMATTING THE MICROSD CARD The microSD Card is needed to format firstly on the computer and then format on the camera to make sure it can be more compatible with the camera. When using the 32GB card above, the card has to be formatted on the camera, then the camera can record normally. If not format, the camera will show "Insert SD card" on the screen. This dash cam supports a microSD card, up to 128G with class 10 & above. 4.
USE THE “ROADCAM” APP CONNECT WITH THE APP 1. Long press the Wifi button on the bottom of camera to enter the Wifi settings interface. 2. Go to your smartphone’s Wifi settings and connect to the Wifi name that’s shown on the dash cam. Enter the password and confirm the Wifi network. 3. Open the "RoadCam" app, tap "Add Recorder", wait a few seconds to enter the preview interface. 4. Tap the video or photo icon to control the dash cam, either recording videos or shooting photos.
DOWNLOAD OR DELETE VIDEOS AND PHOTOS 1. Tap the icon to stop the recording. 2. Tap the or icon to check the videos or photos. 3. Tap "Select" and choose videos or photos that you want. 4. Tap the download or delete icon to download or delete. Note: To exit the Wifi feature, please press the power button on the dash cam. Video Exit Movie DVR74ee2aad313d Loop video Select 13:35:47 150.00MB F R Video Photo Video Loop video 13:32:26 81.00MB 13:35:47 150.00MB www.kingslim.net/manual/d1pro.