Use and Care Manual

Installation Guideline for Stone Resin Series Vessel Bathroom Vanity

Things you will need:

1. Vessel Sink 2. Plumber Putty 3.Drain Hardware 4. Silicone Caulk

 Vessel sinks are supported directly by the countertop, Rest the sink on the predrilled

drain hole in your countertop. Align the vessel drain hole facing directly downward.

 Caulk the edges of the sink hole. From beneath the countertop, use silicone caulk to

seal the seam between the vessel sink and the edges of the countertop hole. This will

keep moisture from dripping down.

 Separate the drain body from the rest of the assembly. Since each vessel sink is

different, check the manual that came with your sink to keep track of how the washers,

nuts and O-rings fit on the assembly.

 Slide the drain body down into the sink’s drain hole. If the vessel sink instructions require

it, apply a bead of plumber’s putty around the fitting and press it firmly into place.

 From underneath the vessel sink, reattach the rest of the washers and other assembly

hardware to the drain body, protruding from the drain hole. Check the vessel sink

instructions to be sure you assemble everything properly.

 Attach P-Trap. Depending on your vessel sink design, you may be using a custom P-

trap and drain fittings. Otherwise, you can attach the drain assembly to the existing P-

trap, hand-tightening the connections.

 Release the stop valves for the hot and cold water and test the sink faucet.

Contact information: by email at info@contempolivinginc.com or by phone toll free from

Monday through Friday (except on holidays) from 9 am through 4 pm at 888-413-0171

PAGE 1
Installation Guideline for Stone Resin Series Vessel Bathroom Vanity Things you will need: 1. Vessel Sink 2. Plumber Putty 3.Drain Hardware 4. Silicone Caulk  Vessel sinks are supported directly by the countertop, Rest the sink on the predrilled drain hole in your countertop. Align the vessel drain hole facing directly downward.  Caulk the edges of the sink hole. From beneath the countertop, use silicone caulk to seal the seam between the vessel sink and the edges of the countertop hole.
PAGE 2
_________________________________________________________________________ Care and Maintenance       Clean regularly with normal detergent and warm water. Always make a habit of drying your sink after use and buffing with a soft cloth. This will ensure that no buildup of lime scale or other mineral deposits can occur. Clean the sink once a week using a nonabrasive cleanser such as Comet and a clean soft sponge Scrub in the same direction as the natural grain of the sink.