Product Manual

TruckMaster® – Operating and safety manual
10
13. MAINTENANCE
Keep the tank and its equipment clean and in good condition. Before each
use, check the product for damage. In particular, ensure that the structure
of the tank is not compromised, all connections are tight, and the pump
power cord is not damaged.
Do not use a damaged or poorly marked tank.
14. WARRANTY
Prior to leaving the factory, each product was carefully and thor-
oughly checked in terms of safety and operation. If you spot
a defect or damage, contact your dealer or manufacturer.
Warranty details are in a separate document included with the product.
15. ACTIONS IN THE CASE OF ACCIDENT
In the case of leak or overfilling a tank, safety actions should be immediately
taken as described in the safety data sheet of diesel.
In particular, quickly and safely stop or reduce the spill of diesel
by sealing the tank or by cutting off the flow of diesel (in the
case of events occurring during the filling of a tank). Depending
on the size of spill and its location, transfer the spilled diesel into another
container or soak up with an appropriate absorbent material (e.g. sand) and
dispose of safely following local regulations.
It is important to be aware of your local regulations and guidelines in the
event of a spill occurring. It may be a requirement to immediately inform
the local authorities, e.g. environmental agency or technical inspection of-
fice, about the spill of diesel and the damage of tank.