0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free farm defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty ig limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Wall Mount Tub Filler Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off bath supply lines after flushing. Need Tools: Teflon Tape Basin Wrench Adjustable Wrench Silicone Sealant Screwdriver 1] 2] Apply Teflon tape (/E&W Cold 6] 1. Shut off main wale supply valve before installation 2. Apply Teflon tape on the heads of the copper shank. Install the elbow. 5. Connect walrus supply shank to hot and cold water supply line.
Replacement Parts: 5 Hot Cartridge KSRPT1000HC 4 Cold Cartridge: KSRPT1000CC & Handle: CCML1 Parts: . ) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.