0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: INSTALLATION INSTRUCTIONS % [ For Use With KB's Wall Mount Tub/Shower Faucet M %fl %A Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off bath supply lines after fishing. Apply Teflon tape on e reads of the copper & Place & washer hellbent e side Noel of lhe shower 6 Tum on the faucet and Iet hot and cold water ko shank. Install the elbow. cradle and the cone nut of the shower hose.
Replacement Parts: Parts: Hot Cartridge KSRPT1000HC ((G= Cold Cartridge: KSRPT1000CC = Divert Cartridges KSRPT1000DC g Handle: ECCL . ) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.