0 YEAR MANUFACTURER'S K ] N LIMITED WARRANTY . Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Wall Mount Tub Filler Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off bath supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver Install the spout on top of faucet body. 5. Connect water supply shank to hot and cold water 6. Turn on wale supply valves and sack for Umiaks, supply line. especially all supply line connections. 3] 4] Apply Teflon taps 3.
Replacement Parts: Parts: Hot Cartridge KSRPT1000HC ((G= Cold Cartridge: KSRPT1000CC G Hot Handle: CCMX1H Cal Handle: CCMX1C . ) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.