0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
BEF INSTALLATION INSTRUCTIONS For Use With KB's Wall Mount Tub Filler Faucet With Hand Shower ORE BEGINNING INSTALLATION 1. Flush plumbing lines lo clear any debris. 2. Shut off both supply lines after gushing. Need Tools: F==3 == Basin Wrench Adjustable Wrench Teflon Tape %% Silicone Sealant Screwdriver 1] Ag ply Teflon taps 6] 8. Place a washer between the side hole of the 1. Shut off main water supply valve before installation. 2. Apply Teflon tape an the threads of the copper shank. Install the elbow.
Replacement Parts: 5 Hot Cartridge KSRPT1000HC 4 Cold Cartridge: KSRPT1000CC Inverter Cartridge: KSRPT4100C Handle: CCML1 . ) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.
Free standing supply lines Installation Parts: Cans Washer Screw Sower Lock Nut & & & Coupling Nut Anchor Set Screw e ° | PCs PCs 14 Pcs PCs www.kingstonbrass.com TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA91710 Before starting the installation of your supply lines you should: = Verify the center to center of your faucet and rough in your supply lines accordingly.