0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt.
Need Tools: KINGSTON INSTALLATION INSTRUCTIONS == = Wall Mount Exposed Shower Basin Wrench Adjustable Wrench ~~ Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off main water supply valve before installation. 2. Tum on old faucet to remove any excess water in the supply lines. Apply Teflon tape onto both threads of supply elbows. 5.
Hot Handle: KSHATRIYA = Cold Handle: KSH113C CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when nettling, 2. Clean your faucet with only a mild soap and water solution. 3. Dry your faucet after using it. 4.
Installation manual for hand shower : 1] Installation manual for pull-out & pull-down 1. Put a washer to the cone shape hose nut and hand tightens the hand shower clockwise. 2. Tum on the water and check for leaks, if the hand shower leaks at the connection to the hose, hand tighten the connection some mots. 1] 1. Thread hose to spray head and feed from the top into the faucet spout, tum the spout to the right or to the left fully to facilitate the insertion of the hose. 2.
KINGSTON > REI RATE ~ INSTALLATION INSTRUCTIONS == Hand Shower Sets, Shower head Sets and Kitchen Sprayer Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Before installation: ZoT Hold the existing shower arm up and down to ensure the plumbing behind the wall is exile tare rigid to hold the weight of the new shower unit about 3-4 Ibs when filed with water. Guppy Line Plumber's Putty Installation manual for shower arm & shower head: Installation manual for deck mount sprayer. Rubber Washer 1.
KINGSTON KITCHEN & BATH INSTALLATION INSTRUCTIONS Convert To Shower Without Spout & Shower head BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear debris in pipe and plumbing lines to avoid existing clogs into waterway & cartridge system of new faucet fixture. 2. Shut off both supply lines after flushing NN ā Riser Anchor Wall Support Bracket | Mounting Screw eā Couplet @ Ea Use Teflon Tape Riser Anchor Use Teflon Tape | | Parts: \ Mounting Screw Use Teflon Tape PCs www.kingstonbrass.