0 YEAR MANUFACTURER'S KI KINGSTON LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser o be free EUTHENICS BATH from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser’s receipt.
Need Tools: KINGSTON . INSTALLATION INSTRUCTIONS =0 % S Deck Mount Tub Filler with Hand Shower BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver 2. Shut off both supply lines after flushing. Torsion tape 1. Shut off main water supply valve before 2. Apply Teflon tape on the threads of the 5. Place a washer between the side hole of 6. Tum on both hot and cold valves, let installation. caper shank.
KINGSTON KITCHEN R BATH Free standing supply lines Installation Parts: Lock Nut & & Coupling Nut Anchor & ® PCs PCs 14 Pcs www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA 91710 Before starting the installation of your supply lines you should: » Verify the center to center of your faucet and rough in your supply lines accordingly.
KINGSTON KITCHEN & BATH www.kingstonbrass.
KINGSTON KITCHEN Ba Bath INSTALLATION INSTRUCTIONS Brass Tub Bath Drain Note: Observe all local plumbing and building codes. TOOLS REQUIRED Drain Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver Pipe Wrench INSTALLATION INSTRUCTIONS: 1. Place rubber washer (10) onto waste tube (9} and set them under the tub. 2. Apply Teflon tape on strainer thread and a bead of silicone Rubber Gasket (3) " sealant under waste strainer (11) and thread into waste Cover Plate (2) Ny tube (9).
KINGSTON KITCHEN R BATH Drain Bracelets Installation Parts: Set Screw PCs www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA 91710 . TOOLS REQUIRED / Adjustable Wrench Allen wrench These drain bracelets are designed to assist you in securing your freestanding supply lines when the distance to the wall is greater than the reach of the wall bracket rod. Installation Steps: fl % 1. Insert drain bracelets into the overflow tube. @ 2.
