P-Trap Installation: Lavatory Faucet Hole 4. Waste Cover 8. Tail Piece 6. Horizontal Leg 1. Slip Joint Nut 2. Black Washer 7. Bottle Trap 3. Slip Joint Nut 5. Black Washer Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape fo all exposed threads. Insert slip joint nut (3) and waste cover (4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut {1)onto tail piece (8).
1. ow FAUCET INSTALLATION INSTRUCTIONS WALL MOUNT BASIN Before Installation : Prior the installation, unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready to install it. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall supports, maybe required. Observe all local plumbing and building codes. Do not install this fixture alone.
KINGSTON KITCHEN RB BATH Toggle Bolt Anchor Installation Instructions: 1. 2. If you are installing on a plaster (Drywall) wall we recommend using toggle bolt anchors (included), drill a 5/8” hole at the marked location of the holes Remove toggle from bolt, insert washer on the bolt and insert bolt through the basin mounting holes.