0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges andiron damage resulting from improper installation, repair or replacements, a8 well as incidental and consequential damages connected therewith ars excluded.
B BRASS INSTALLATION INSTRUCTIONS Far Use With KB's Twin Handles Kitchen Faucet with or without Sprayer BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off hot and cold water supply under slam pars. Remove old faucet sink. Plug sink drain with cloth bo avoid losing 2. Insert the inlet shanks through the sink holes, and press down. Assemble the washers and lockouts on the inlet shanks, and then tighten Ihe nuts by hand.
Parts: Replacement Parts: Cartridge: KBRF101C N oW am@~ Hot Handle: Cu old Handle: KBHB981ZXC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.