0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
IKK BRASS INSTALLATION INSTRUCTIONS Twin Handles Kitchen Faucet with or without Sprayer BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench ~~ Teflon Tape Silicone Sealant Screwdriver Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet. 2. Insert the inlet shanks through the sink holes, and press down.
Parts: Replacement Parts Cartridge: KERP101C of la Hot Handle: KBHE&B1SVLH Cold Handle: KBH861SVLC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.