0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KINGSTON KH ATH INSTALLATION INSTRUCTIONS Widespread Lavatory Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver Hot Cold Apply Teflon tape] 2. Sparingly apply a small bead of silicon caulking 7. Attach flexible hoses to the outlet port of hot 8.
Parts: Replacement Parts Hot Cartridge: FSCRP1971HC. Cold Cartridge FSCRP1S71CC Hot Handle: FSCH1971ALH Cold Handle: FSCH1371ALC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.
KINGSTON KITCHEN RB BATH Mounting nut installation instructions To install the mounting hardware: 1 1. Unscrew Both adjustment screws as much as possible without removing them. 2 2. Thread lock nut onto the valve assembly and slip on the metal washer. 3 3. Once the valve assembly has been secured from the top, 4 hand tighten brass lock nut all the way to the top. Tight the 5 nut to flush with steel washer and secure the valve by hand. 4.