0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Ne Tools: Ee 5 . INSTALLATION INSTRUCTIONS For Use With KB's Widespread Lavatory Faucet = a } with or without Pop-Up Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant ~~ Screwdriver BEFORE BEGINNING INSTALLATION BO Er ios oo a tos. 2. Shut off both supply lines after flushing Drain Plug a Sink Drain Flange Opening fe Pivot Rod Opening 1. Shut off hot and cold water supply under sink. 6. Thread mounting nut and bottom gasket onto drain body. Wrap top threaded end of the drain 7.
Replacement Parts: c Hot Cartridge: FSCRP1871HC = (Cold Cartridge: FSCRP1971CC| A Hot Handle: KBH8961EFLH Cold Handle: KBH8861EFLC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.
Mounting nut installation instr To install the mounting hardware: 1. Unscrew Both adjustment screws as much as possible without removing them. 2. Thread lockout onto the valve assembly and slip on the metal washer. 3. Once the valve assembly has been secured from the top, hand tighten brass lockout all the way to the top. Tight the nut to flush with steel washer and secure the valve by hand. 4. Gently secure the screws to lock the valve assembly in place use only a Phillips head screw driver.