0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten{10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited o defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Widespread Lavatory Faucet Installation g =g | [Stability transact) L Begin Wrench % || Teflon's Tape Silicon Sealant =2l ([ Pips Wren ) Screwdriver | CAUTION: Before You Begin (May Void Warranty) 1. Flush both supply lines to clear any debris. 2. Shut off both supply lines after flushing. INSTALLATION [ 1. Remove the Tee Connector (16,17) and spout mounting from spout (9). (8] 2.
9. Insert Stem assembly through the appropriate hole from the top of the sink or counter. 10. Hot and Cold Stem are easily identifiable by a Redford) or Blue (Cold) band, thread handle Applicable) and escutcheon (19) onto stem assembly. 11. From underneath screw the valve body, thread rubber washer(12), metal washer(13) and brass lock nut (14), align direction of stem assembly, making sure that the outset port (Short) of stem assembly is aimed towards the tee connector. @ 12.