Yi STEP 3 (Recommended for professional installers only. } Attach the under mount mounting plates. Position bow! so that reveal is equidistant. Then on underside of counter top, drill holes for the inserts of the mounting plates. Use a drill bit with stop block to avoid drilling through the top. Use 3~2 mounting plates on the long sides of the sink, and 2~1 mounting plates on the short sides of the sink, or follow the locations on the template that comes with the sink.
KINGSTON BRASS INSTALLATION INSTRUCTIONS UNDER MOUNT SINKS These instructions are for installing Kingston Brass Under mount stainless steel sinks. Under mount sinks are sinks that are mounted from below the counter top. If you are installing another type of sink, such as a drop-In sink which is installed on top of the counter, please refer to instructions specifically for those sinks.
ook wh KINGSTON KITCHEN & BATH INSTALLATION INSTRUCTIONS UNDER MOUNT CLIP FOR STAINLESS STEEL SINK Installation: 1. Drill evenly spaced 7/16" holes to insert anchors, generally 2~1 on the short side and 3~2 on each long side. Insert anchor. Add a bead of silicone-based caulking around the perimeter of the sink and place sink at the desired location. Place plates with the curved end towards the sink. Thread bolts until the sink is firmly secure. Clean any excess caulking.